VIAIR
VIAIR Escapade Heavy Duty Compact Onboard Air System
VIAIR Escapade Heavy Duty Compact Onboard Air System
Mad Moose | Shop
5193 Industrial Drive
Hurricane UT 84737
Estados Unidos
VIAIR’s Escapade Heavy Duty Compact Onboard Air System is a compact, pre-packaged compressed air solution that features an industry-leading, 150PSI rated, 33% duty 400C compressor, an extruded aluminum tank, and all components needed to install a working system capable of tire inflation and air locker actuation. This OBA System comes complete with an onboard pressure switch, automatic coupler and a tire Inflation Kit.
Additional Info Download:
| FEATURES |
|---|
| – 400C 150 PSI VIAIR Compressor w/ Thermal Overload Protector (1) |
| – Extruded Aluminum Air Tank (1) |
| – Sealed Pressure Switch (110 PSI on, 145 PSI off) (Pre-installed) (1) |
| – Sealed 40-Amp 4-prong Relay with pre-wired female socket (1) |
| – 40-amp Relay Sealed 4-prong relay w/pre-wired female socket (1) |
| – Tire Inflation Gun with 160 PSI Gauge (1) |
| – 30ft. Coil Hose with Quick Connect and Stud (1) |
| – Rubber Tipped Blow Gun (1) |
| – Quick Connect Coupler (Pre-installed) (1) |
| – 1/4″ 175 PSI Safety Valve (Pre-installed) (1) |
| – 1/4″ NPT Plugs Kit (Pre-installed) (1) |
| – 1/8″ Drain Cock (Pre-installed) (1) |
| – 1/4″ NPT to 1/8″ BSP Adaptors (2) |
| – Air Filter Housing w/ Replacement 
Air Filter Elements (1) |
| – 20ft. Freeze Resistant 12-Gauge Wire 
w/ Inline Fuse Holder (1) |
| SPECIFICATIONS |
|---|
| – 12-Volt |
| – Permanent Magnetic Motor |
| – Duty Cycle: 33% @ 100 PSI |
| – Max. Working Pressure: 150 PSI |
| – Max. Amp Draw: 30-Amps |
| – Ingress Protection Rating: IP67 |
| – Dimensions: 9″L x 4″W x 6.75″H |
| – Net Weight: 10 lbs. |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
* For 12V Only.
Please Note: Use thread sealant for proper installation. Thread tape is not recommended.
Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
PERFORMANCE DATA
| PSI | CFM | A | BAR | LPM | A |
|---|---|---|---|---|---|
| 0 | 2.62 | 15 | 0 | 74 | 16 |
| 10 | 2.39 | 18 | 1.0 | 65 | 20 |
| 20 | 2.21 | 20 | 2.0 | 60 | 23 |
| 30 | 2.11 | 22 | 3.0 | 56 | 25 |
| 40 | 2.01 | 24 | 4.0 | 53 | 27 |
| 50 | 1.93 | 25 | 5.0 | 49 | 28 |
| 60 | 1.84 | 26 | 6.0 | 46 | 28 |
| 70 | 1.73 | 27 | 7.0 | 42 | 28 |
| 80 | 1.65 | 27 | 8.0 | 38 | 28 |
| 90 | 1.52 | 27 | 9.0 | 35 | 27 |
| 100 | 1.45 | 27 | 10.0 | 31 | 27 |
| 110 | 1.35 | 27 | |||
| 120 | 1.26 | 27 | |||
| 130 | 1.19 | 27 | |||
| 140 | 1.08 | 27 | |||
| 150 | 1.01 | 26 |
* Supply Voltage: 13.8 Volts
FILL RATES
| 31” X 10.5” | FILL RATE |
|---|---|
| 0 to 30 PSI | 3 min. 00 sec. (± 10 sec.) |
| 15 to 30 PSI | 1 min. 35 sec. (± 05 sec.) |
| 33” X 12.5″ | FILL RATE |
| 0 to 30 PSI | 4 min. 20 sec. (± 10 sec.) |
| 15 to 30 PSI | 2 min. 05 sec. (± 05 sec.) |
| 35” X 12.5” | FILL RATE |
| 0 to 30 PSI | 5 min. 20 sec. (± 15 sec.) |
| 15 to 30 PSI | 2 min. 45 sec. (± 10 sec.) |